How To Connect Plantronics C054 Headset To Cisco Ip Phone. The ehs cable is connected between the headset base unit (not the headset) and the deskphone to pass on the call control commands the base receives from the controls on the headset. † a usb headset has a flat, rectangular plug that connects to a usb port on your computer.
Step 2 on the other end of the plantronics hook switch cable, plug the smoke colored cord into the headset port of your cisco phone, then plug the other end into the aux port.if your cisco phone has a sidecar, follow the cs540 setup guide. † an analog headset has rounded plugs that connect to the computer audio Power on the bluetooth headset or turn on bluetooth on your mobile device to make it available for pairing.
Connect A Headset On Your Ip Phone.
To make a call, push the button on the side of the cs540 headset to turn the headset on. Choose bluetooth using the navigation cluster button. How do you connect a plantronics usb headset to desk phone?
Hi Steve (And Thanks Alex).
Do not unplug the phone handset. These settings can be found under the charging base. Answer/end calls by pressing the headsets call control button and phone headset button.
This Is Standard Architecture For All Vendors, As Alex.
If prompted for a passkey, enter 0000 (four zeros). Plug the telephone interface cable into the base. (see below for jabra compatible cisco headsets).
Understanding Your Cs540 Wireless Headset.
Usb ports — connect your usb headset to either of the two available usb ports. Chapter 5 using headsets and other audio devices with cisco ip communicator using a headset using a headset you can use a usb headset or an analog headset with cisco ip communicator. Move the compatibility slider switch of the headset base to letter d.
To Learn How To Configure The Primary Audio Output Device On Your Ip Phone, Click Here.for A List Of Compatible Accessories, Click Here.
Release the button and set the headset aside. Without it the deskphone has no way of receiving the commands. Echoes in headset is a fairly common issue, and can be easily fixed by adjusting a few settings!