Factory Reset 8851 Cisco Phone. Click the confirm factory reset link to proceed with the reset process. Suyash pal singh is a customer support engineer in cisco tac team for unified communications technology based in bangalore.
A hard factory reset resets all of the parameters of the phone including network and security settings. If using poe, unplug the lan cable. Reset from the device keypad.
This Applies Only To The 8811 And 8841 Display Phones.
Reset the phone to the factory settings from the phone keypad. Wait for a few moments while the phone is resetting. And the hardware version of cisco ip phone 8841, 8851, and 8861 must be 15 or later.
Press The Settings Button Confirm With Ok To Factory Reset The Phone Wait Some Time For The Phone To Reboot.
Resetting the cisco ip phone 7800 or 8800 series multiplatform phone to default setting lets you revert all the settings of the phone to factory default settings. Factory reset cisco phone 8841. Confirm by pressing the ok soft key.
Cisco Ip Phone 8811, 8841, 8851, And 8861 User Guide For Cisco Unified Communications Manager 10.5 First Published:
Click the confirm factory reset link to proceed with the reset process. In my case i'm using an 8861 but anything in the 8800 and 7800 family should be the same. Note that you may see the phone reset multiple.
How To Reset A Cisco Phone.
Press and hold # and plug the phone back in. The phone begins the reboot process. Or proceed to the phone menu > settings > advanced settings > enter the phone password (the default password:
If Using Poe, Unplug The Lan Cable.
Press and hold 0 and plug the phone back in. Then press ok to confirm factory reset. When the light on the mute button turns off, press 123456789*0# in sequence.